Description
This is a hybrid stepping motor with 2-phases and 4-wire bipolar windings.
General Specification:
Shaft Diameter:8mm with 2 flat faces
Step Angle: 1.8° (200 step/rev)
Motor Length: 76 mm
Rated Current: 3.0 Amps per phase
Phase Resistance: 1.0 ohms
Phase Inductance: 3.5 mH
Holding Torque: 255 oz-in / 180 N.cm
Detent Torque: 5 N.cm max
Rotor Inertia:440 g.cm2
Weight: 1050g
Wiring:
Red: A+
Green:A-
Yellow:B+
Blue:B-
Step angle accuracy: ±5%(full step,no load)
Resistance accuracy: ±10%
Inductance accuracy: ±20%
Temperature rise: 80°C Max(rated current,2 phase on)
Ambient temperature: -20° ~ +50°C
Insulation resistance:100MΩ Min,500VDC
Insultion Strength: 500VAC for one minute
